|
|
|
|
|
Rental Products
> Surface or Sub-Sea Casing Ram Test Tools
> Procedure for Installing and Using a Surface Casing Ram Test Sub
|
<< Return
|
Procedure for Installing and Using a Surface Casing Ram Test Sub
|
-
Make the Surface Casing Ram Test Sub onto a string of drill pipe.
-
Pick the test assembly up and lower it down through the BOP Stack.
-
Close your Casing Rams around the test surface.
-
Pick test assemble up, until the 17 ½” material bumps against the bottom of the Ram.
-
Pressure up against the Casing Ram. When test is finish, bleed the pressure off and pull the assembly out of the BOP Stack.
|
|
|
|
| |
Download Surface Casing Ram Test Sub (SCRTS) Diagram 1